Products
Production
Paper
Keywords:
Paper
Classification:
- 产品描述
-
Descriptions
Bio-soluble fiber paper is a lightweight refractory material processed form soluble fibers into a highly flexible, uniform sheet. It is recommended for continuous use at temperatures up to 1000℃.Ceramic fiber paper has low shrinkage, good handling strength and low thermal conductivity. It contains a small amount of organic binder which makes it flexible, and reduces off-gassing and odour during using.
Features
Easy to cut, wrap or form
Temperature stability
Low thermal conductivity
Excellent flexibility
High fired tensile strength
Excellent flame resistance
Typical Applications
Replacement of asbestos paper
Investment cast mold wrap insulation
One-time consumable insulating applications
Back-up lining for metal troughs
Hot top lining
Applications where low binder content is required
Thermal and electrical insulation
Upgrade for fiberglass paper and blanket
Typical Parameters
Description
Bio-soluble Fiber Paper
Moisture Content(%)
≤1
Organic Content(%)
≤10
Theoretical Density(kg/m³)
200±15
Tensile Strength(MPa)
≥0.3
Specification(mm)
40000/30000/20000/10000x610/1220x1/2/3/4/5
The data shown are average results of tests under standard procedures and are subject to variation. Results should not be used for specification purposes or creating any contractual obligation. For more information on the safety application or materials, please refer to the work practices and material safety data sheet.
More products
Refractory Material
Alumina fiber
-
1600℃ (3000℉) Alumina Fiber Board
1600℃ (3000℉) Alumina fiber board is made of alumina fiber bulk, compressed together with organic and inorganic adhesives by wet vacuum forming process.
-
1600℃ (3000℉) Alumina Fiber Paper
1600℃ (3000℉) Alumina fiber Paper is mainly made of polycrystalline alumina fiber and binder, with advanced flame retardance property, heat-insulating property, electrical insulation property, High & Low temperature resistance property and ageing resistance property.
-
1600℃ (3000℉) Alumina Fiber Blanket
1600℃ (3000℉) Alumina fiber needling blanket is processed by chemical "Sol-Gel" into spinning solution containing aluminum oxide silicon, then special processed into precursor fiber bulk, after carding, flattening, needling, high temp annealing.
-
Microporous Board
It is a new type of heat insulation material obtained after a series of physical and chemical reactions, consisting of silicon dioxide particles with diameters of tens of nanometers, and infrared sunscreens and fibers.
Bio-soluble Fiber
-
Bio Soluble Fiber Board
Bio Soluble fiber board is manufactured in a wet forming process using Bio-Soluble fiber bulk and binders. Bio-soluble fiber board is designed for insulation applications experiencing vibration, mechanical stress and erosive forces.
-
Bio-Soluble Fiber Bulk
CCFR® Bio-Soluble Fiber Bulk is a new develop at the basic of the traditional ceramic fiber, the main components is MgO, CaO, with integrated fire resistance, heat separation and thermal insulation functions.
-
Bio-soluble Fiber Blanket
CCFR® Bio-soluble Fiber Blanket is high strength, needled insulating blanket that is made from Soluble ceramic fiber bulk. The combination of spinning and needling operation produce tough,resilient and strong blankets,which have superior thermal and mechanical properties.
-
Bio-Soluble Fiber Paper
CCFR® Bio-soluble Fiber Paper is a new develop at the basic of the traditional ceramic fiber，It is a type of fiber paper made from MgO, CaO, and a small amount of organic binder.
Calcium Silicate Board
-
High Density Calcium Silicate Insulation Board
With density range 750--900kgs/m3 ,high density calcium silicate insulation board is developed for the non-ferrous industry used for feeding ,casting and molding of molten aluminum and other non-ferrous metals, also can be used for clamping fixture of glass industry.
-
Calcium Silicate Board
The main constituents of 1000℃ calcium silicate insulation board is Xonotlite and reinforced glass fibre,no asbestos. It is a kind of high efficient energy-saving material with temperature limited 1050 cent-degree.
Ceramic Fiber
-
Expanded Graphite Ceramic Fiber Paper
Expanded graphite ceramic fiber paper is processed with high-quality ceramic fiber cotton and expanded graphite, which is after beating, mixing, matching binders, molding and drying, cutter, packaging and other craft production into high-quality expanded graphite fiber paper.
-
Ceramic Fiber Board
Ceramic Fiber board is manufactured in a wet forming process using Ceramic Fiber bulk and binders. Ceramic Fiber board is designed for insulation applications experiencing vibration, mechanical stress and erosive forces.
-
Ceramic Fiber Textile
It is featured with heat insulation and high temperature protective materials in all kind of thermal installations and heat-conducting systems,widely used in welding,foundry works,aluminum and steel mills,boiler insulation and seal,shipyards,refineries,power plants and chemical plants.
-
Ceramic Fiber Bulk
Ceramic fiber bulk ,adopting high purity clay clinker, alumina powder and silica powder as material, melted in high temperature by the industrial furnace, blowing or swinging , is produced by swinging technology.
-
Ceramic Fiber Module
CCFR module is made from compressed ceramic fiber blanket. The module is specially designed to meet the thermal insulation requirements of industrial furnaces in some special thermal conditions.
-
Ceramic Fiber Blanket
CCFR blanket is high strength, needled insulating blanket that is made from CCFR bulk. The combination of long spun fibers and needling operation produce tough, resilient and strong blankets, which resist tearing both before and after heating.
-
Ceramic Fiber Vacuum Formed Shapes
Ceramic fiber vacuum formed special shaped products takes high quality ceramic fibers as the main raw materials, then add some organic and inorganic binder, through vacuum forming process, to be made into various shapes high strength ceramic fiber products.
-
Ceramic Fiber Paper
CCFR® Ceramic fiber paper is manufactured by blending Ceramic Fiber Bulk, binders, and additives.The specialized paper-making process is used to form uniform and flexible paper.
High-Alumina
-
Alumina Lining Brick
It can effectively resist the impact of materials on the pipe wall, protect the equipment from severe wear and corrosion, and extend the service life of the equipment.
-
Ceramic Grinding Media
Ceramic grinding media are solid materials used in grinding and milling processes to crush, grind, or refine materials into smaller particles.
-
Ceramic Rollers
Widely used in the manufacturing of wall tile, roof tile, rustic tile, thin tile, porcelain tile, polishing glazed, tableware and other ceramic productions.
Refractory Brick
-
Cast Steel Brick
They were widely used in all parts of fumace lining of metallurgic, petroleum, construction materials, machinery and militaries, etc.
-
Fireclay Bricks
Fireclay bricks are alumina silicate bricks with the refractoriness of SK 32-34 and contain 35- 45% alumina.
-
Insulation Brick
CCFR insulation brick is made from high-purity refractory powder and organic fillers which burn out during manufacture to five a uniform and controlled pore sture.
Thermal Insulation Material
Glass Wool
-
Glass Wool Blanket
Glass Wool Blanket is made from natural sand to which recycled glass(cullet) and fluxing agents are added, The material is melted to 1100°C in an electric furnace, and then forced through precision drilled holes in high speed spinning disks, to form fibers.
-
Glass Wool Pipe
Glass Wool Pipe can be used for all kinds of thermal insulation air pipes, oil pipelines, power pipelines and other pipelines, to play the role of thermal insulation, sound absorption and noise reduction, safety and environmental protection, the use of A1 grade uniform slim glass fiber, self-extinguishing from fire, low thermal conductivity.
-
Glass Wool Board
Glass Wool Board can be regarded as porous materials, with good insulation, sound absorption performance.
Rock Wool
-
Rock Wool Blanket
Rock Wool Blanket for industrial insulation is a kind of rock wool product like roll felt, with the sturdy resilient felt and galvanized iron wire netting or stainless steel wire, and the retentivity of this structure makes rock wool felt not break
-
Rock Wool Board
Rock wool board for industry has a certain strength, the fiber structure of which makes itself have the properties of good dimensional stability, thermal stability and chemical stability, and also have another three characteristics of excellent hear resistance, corrosion resistance and low thermal conductivity.
-
Rock Wool Pipe
Rock Wool Pipe is widely used in petroleum, chemical industry, metallurgy, shipbuilding, textile and other industrial boilers and equipment pipe insulation, but also used in the construction industry partition wall, ceiling and internal and external wall insulation and various types of cold, hot pipes and hidden, exposed pipe insulation.
Acoustic Insulating Material
-
Rubber Plastic products
Rubber Plastic products are specialized flexible heat insulating materials that can effectively prevent moisture condensation.
-
Rubber Plastic products
Characterized by low thermal conductivity and high resistance against vapor permeation, these products can reduce end resist vapor permeation in a lung period
-
Rubber Plastic products
By virtue of high-quality raw materials combined with leading production processes, Rubber and Plastic products have excellent heat insulating and fire protection performance.
-
Rubber Plastic products
Rubber Plastic products are specialized flexible heat insulating materials that can effectively prevent moisture condensation.
-
Rubber Plastic products
Characterized by low thermal conductivity and high resistance against vapor permeation, these products can reduce end resist vapor permeation in a lung period
FILL OUT THE
FORM AND
GET FREE
CONSULTATION
You can submit your information online and we will get back to you within 24 hours!
Address：No. 62 Gongqingtuan Road,Zibo,Shandong,China