Welcome to SHANDONG HIKING INTERNATIONAL COMMERCE GROUP CO.LTD !
COPYRIGHT © 2018 SHANDONG HIKING INTERNATIONAL COMMERCE GROUP CO.LTD 鲁ICP备18023600号
Board
Board
Descriptions
Bio-soluble fiber boards are made from soluble fiber and a small amount of organic binder. Due to the high fiber content,Soluble fiber boards are strong, lightweight and thermal shock resistant. Thickness over 50mm is obtained by bonding resistance two thinner sheets.
Features
Waterproof
Resistant to thermal shock
Low thermal conductivity
Precise geometry and close tolerances
Homogeneous structure, easy for machining
Non-brittle
High fiber content
Lightweight, low heat storage
Easy to install
Typical Applications
Refractory lining for industrial furnaces in walls, roofs, doors, stacks, etc
Combustion chamber liners, boilers and heaters
Back-up insulation for brick and monolithic refractories
Transfer of molten aluminum and other nonferrous metals
Expansion joint boards
Barrier against flame or heat
Hot face layer for high velocity or abrasive furnace atmosphere
Atmosphere
Typical Parameters
|
Description |
Bo-soluble fiber board |
|
Solubility(mg/l) |
≥200 |
|
Shrinkage on Heating(%) |
1000℃x24h≤-4 |
|
Moisture Content(%) |
≤1 |
|
Organic content(%) |
≤6 |
|
Thermal Conductivity/(m.k) (Mean Temperature 500℃) |
≤0.135 |
|
Theoretical Density(kg/m³) |
280±15 |
|
Compressive Strength(MPa) |
≥0.1 |
|
Specification(mm) |
900x600x25/50 |
|
MgO+CaO(%) |
≥18 |
The data shown are average results of tests under standard procedures and are subject to variation. Results should not be used for specification purposes or creating any contractual obligation. For more information on the safety application or materials, please refer to the work practices and material safety data sheet.